材料科学基础第二章作业答案.docVIP

The procedure for finding the Miller indices for directions is as follows: Using a right-handed coordinate system, determine the coordinates of two points, that lie on the direction. Subtract the coordinates of the 搕ail?point from the coordinates of the 揾ead?point to obtain the number of lattice parameters traveled in the direction of each axis of the coordinate system. Clear fractions and/or reduce the results obtained from the subtraction to lowest integers. Enclose the number in square brackets [ ]. If a negative sign is produced, represent the negative sign with a bar over the number. The procedure for finding the Miller indices for planes is as follows: 1. Identify the points at which the plane intercepts the x, y, and z coordinates in terms of the number of lattice parameters. If the plane passes through the origin, the origin of the coordinate system must be moved! 2. Take reciprocals of these intercepts. 3. Clear fractions but not reduce to lowest integers. 4. Enclose the resulting numbers in parentheses ( ). Again, negative numbers should be written with a bar over the number. Point out all the 110 on (111) planes both analytically and graphically.