【模具与数专业英语】教学内容1103.pptVIP

* Unit One The Die Mold Materials and Heat Treatment 模具与数控专业英语 禹诬嘲岭挫证瓣詹悲愚弯仓螺扭针养涸轮乔旷钥撼茎窟迎瞻左辈统肥善芽【模具与数控专业英语】教学内容1103【模具与数控专业英语】教学内容1103 1.3 Heat Treatment of Die Mold Materials 模具与数控专业英语 1.3.1 The Purposes of Heat Treatment The main purpose of heat treatment for die-making and mold-making materials is to control the properties of a specific metal or alloy through the alteration of the structure of the specific metal or alloy by heating it to definite temperatures and cooling at various rates． This combination of heating and controlled cooling determines not only the nature and distribution of the microconstituents，which in turn determine the properties，but also the grain size［2］. 驻瓮寄擒锡腿麦钙候殿疫樟暮信郭谎螟妇祸揭沤俊粉舔族疯海戮慈芝拼款【模具与数控专业英语】教学内容1103【模具与数控专业英语】教学内容1103 模具与数控专业英语 Heat treating should improve the alloy or metal for the service intended． Some of various purposes of heat treating are as follows： l. To remove strains after cold working such as forging, rolling. 2.To remove internal stresses such as produced by drawing, bending, extruding or welding. 3.To increase the hardness of the material and wear-resisting properties. 痰找术戳炮徽壶遏弃浪窝禾迈蛤旨挚灾稽瞬俯署皋亡北酣秘嚣膊滞茬烁糠【模具与数控专业英语】教学内容1103【模具与数控专业英语】教学内容1103 模具与数控专业英语 4. To improve machinability. 5. To improve the comprehensive performance of material on purpose, such as normalizing. 6. To soften the material，as in annealing. 7. To improve or change properties of a material such as corrosion resistance，heat resistance，or others as required. 甥殊杀访涂霄毁驼谣求心您毛暗此榔漫拌毫农蝇淹蛋勇托榆室凉菱秆洱辜【模具与数控专业英语】教学内容1103【模具与数控专业英语】教学内容1103 模具与数控专业英语 1.3.2 Types of Heat Treatment Heat treatment of ferrous materials involves several important operations which are customarily referred to under various headings, such as annealing, normalizing, tempering, hardening, case hardening, spheroidizing, stress relieving, surface treatments and so on. Annealing---The process of annealing consists of heating the steel to an elevated