PR-1047, Well Integrity Maintenance Procedure .DOC

Petroleum Development Oman L.L.C. RESTRICTED Document ID: PR-1047 May 2007 Filing Key: Business Control Well Engineering Well Integrity Maintenance Procedure User Note: The requirements of this document are mandatory. Non-compliance shall only be authorised by the Document Authority or his Delegate through STEP-OUT approval. A controlled copy of the current version of this document is on PDOs EDMS. Before making reference to this document, it is the users responsibility to ensure that any hard copy, or electronic copy, is current. For assistance, contact the Document Custodian. Users are encouraged to participate in the ongoing improvement of this document by providing constructive feedback. Please familiarise yourself with the Document Security Classification Definitions They also apply to this Document! Keywords: WIT, Wellhead Integrity Test, SIT, Subsurface Integrity Test, Well Failure Model, Well type, gas lift wells, steam injection wells, free flowing wells This document is the property of Petroleum Development Oman, LLC. Neither the whole nor any part of this document may be disclosed to others or reproduced, stored in a retrieval system, or transmitted in any form by any means (electronic, mechanical, reprographic recording or otherwise) without prior written consent of the owner. This document can be accessed via the following link: http://sww3.pdo.shell.om/getdoc?dataid=95049 (PDO Intranet) This page was intentionally left blank Document Authorisation Authorised For Issue: May 2007 Revision History The following is a brief summary of the 4 most recent revisions to this document. Details of all revisions prior to these are held on file by the issuing department. Note that changes made as part of Document Maintenance (correction of broken hyperlinks) will not be recorded in this Revision Table. Revision No. Date Author/ Editor Changes/ Remarks 2 April 2007 Obaid Al Farsi (UWXZ/4) Christian Koepchen (UWH/2), Robin Gardiner (UPT/2) Alignment of Well