R系列斜齿轮硬齿面减速机.docVIP

R系列斜齿轮硬齿面减速机 减速机结构特点： 1、采用模块化设计,传动比覆盖范围广,分配精细合理; 2、外形设计适合全方位的万能安装配置; 3、传动比较精确,范围覆盖1.30-289.74,可根据需要任意选取; 4、上海耐坚减速机齿轮经高精度磨齿机磨削加工,传动平衡、噪音低、级间效率达98%; 减速机主要材料： 箱体：铸铁(机座37-167)； 齿轮：20rMo钢，碳、氮共渗处理(精磨后保持齿面硬度HRC60，硬层厚度＞0.5mm)； 平键：45钢，表面硬度HRC50。 结构形式： R：轴伸式底脚安装 RF：法兰安装 R…F：底脚法兰安装 RM: 法兰安装带加长轴承箱 RX：单级底脚安装 RXF：单级法兰安装 速比范围： R基本型3.33～289.74，RX型1.3～8.65，R/R组合型可达到27001 扭矩范围：R基本型85～18000 Nm，RX型20～1680 Nm 功率范围：R基本型0.18～160 kW，RX型0.18～132 kW 　 减速机效率: R系列斜齿轮硬齿面减速机的效率是所有传动式中效率最高的一种，其效率比蜗杆传动要高的多。斜齿轮减速机的效率主要由齿轮及轴承的摩擦决定。 选型参数: staff and workers representativesThe representatives of the staff and workers from the unit or away from retirement, on behalf of automatically disqualified, on behalf of the delegation to the original vacancy shall be in accordance with the provisions of the election.Replace the fourteenth representatives of the staff and workersThere are the representatives of the employees, who have the right to change the unit:1, due to illegal law and discipline punishment;2, often without reason not to participate in the activities of the staff representatives of the staff and the organization of the work of the organization, a serious dereliction of duty;3, because of unpaid leave, sick leave and long-term, full-time study and so on, not to participate in the activities of the post of the staff and workers congress;4, removed from the unit, from the original delegation.The rights of the representatives of the fifteenth employeesFirst, the incumbent will have the right to vote in the election, the right to vote and the right to vote.Two, have the right to participate in the Congress and its working mechanism in the company. Check all relevant departments to carry out the workers congress resolution and proposal to implement the situation, have the right to the right to participate in the personnel of the company leadership question.Three, to participate in the organization of the staff and workers Congress of the activities of the organization an