9320代码.docVIP

#include intrins.h #include reg51.h #include absacc.h //#include image.h #include output.h //#include picdata.h //#define DataBusH P2 #define DataBusH P2 #define DataBusL P0 #define CHX 0xD0 #define CHY 0x90 #define general_delay 5 #define ZERO_FIELD_COUNT 4 #define TP_DCLK(a) T_DCLK=a #define TP_CS(a) T_CS=a #define TP_DIN(a) T_DIN=a #define TP_DOUT T_DOUT #define TP_IRQ T_IRQ #define pp XBYTE[0x0000] #define pic_select P1 sbit CSB = P1^0; sbit RESETB =P1^4; sbit RS = P1^1; sbit WRB = P1^2; sbit RDB = P1^3; sbit KEY = P3^3; sbit T_CS = P3^7; //touch sreen select 1.5 sbit T_DCLK = P3^6; //SPI CLOCK 1.4 sbit T_DIN = P3^5; //SPI DATA IN sbit T_DOUT = P3^4; //SPI DATA OUT 1.3 sbit T_IRQ = P3^3; //IRQ void LCD_INIT_ILI9325(void); void LCD_INIT_ILI9320_028(void); void LCD_INIT_ILI9320_032(void); void LCD_TEST_SingleColor(char colorH,char colorL); //单一颜色显示 void adderset(int xs,int xe,int ys,int ye); //地址区域 void LCD_show_window(); //显示窗口 void LCD_WRITE_CMD(char CMD1,char CMD2); //写入命令两个8位 void LCD_WRITE_DATA(char DATAA,char DATAB); // 写入两个8位数据 void LCD_READ_ID(void); //读取信息 void LLCD_WRITE_CMD(int cmd); //写入命令16位 void LLCD_WRITE_DATA(int dataa); //写入16位数据 void send_host_reg_command(int cmd,int dataa); //发送主寄存器命令 void HD_reset(void); //重设 //lcd 左上角为0.0坐标，横向是 length，纵向 height,*pic 指向图像数据 void LCD_TEST_PIC( char *pic); //void LCD_TEST_PIC( char *pic1,char *pic2 ); void LCD_test_caitiao();//显示彩条 void delayms(int value); void delayus(int value1); void LCD_Color_with_ADD(unsigned int data_l,unsigned int x1,unsigned int x2,unsigned int y1,unsigned int y2);//颜色显示数据，及范围 //触摸屏显示 void ADS7843_disp(); void benchmark(void); void TOUCH_RESET(void); void TOUCH_WRITE(unsigned char command); void TOUCH_READ(unsigned char *xy); void TOUCH_START(unsigned char channel); void TOUCH_CAIJI(void); void DrawDot(unsigned int x_orgi,unsigned int y_orgi); //画点 void location(); unsigned char code picture1[]; unsigned char code s[10]