敦泰电容屏片FT5X06 IIC参考驱.docVIP

敦泰电容屏芯片FT5X06 IIC参考驱动(1)发布时间：2012-04-18 10:29:43 [cpp] view plaincopyprint? static void ft5x0x_ts_release(void) { struct ft5x0x_ts_data *data = i2c_get_clientdata(this_client); #ifdef FT5X0X_MULTI_TOUCH input_report_abs(data-input_dev, ABS_MT_TOUCH_MAJOR, 0); input_report_abs(data-input_dev, ABS_MT_WIDTH_MAJOR, 0); input_report_key(data-input_dev, BTN_TOUCH, 0); #else input_report_abs(data-input_dev, ABS_PRESSURE, 0); input_report_key(data-input_dev, BTN_TOUCH, 0); #endif input_sync(data-input_dev); } static int ft5x0x_read_data(void) { struct ft5x0x_ts_data *data = i2c_get_clientdata(this_client); struct ts_event *event = data-event; u32 buf[32] = {0}; int ret = -1; #ifdef FT5X0X_MULTI_TOUCH ret = ft5x0x_i2c_rxdata(buf, 31); #else ret = ft5x0x_i2c_rxdata(buf, 7); #endif if (ret 0) { printk(%s read_data i2c_rxdata failed: %d\n, __func__, ret); } memset(event, 0, sizeof(struct ts_event)); event-touch_point = buf[2] 0x07; if (event-touch_point == 0) { ft5x0x_ts_release(); return 1; } #ifdef FT5X0X_MULTI_TOUCH switch (event-touch_point) { case 5: event-x5 = (s16)(buf[0x1b] 0x0F)8 | (s16)buf[0x1c]; event-y5 = (s16)(buf[0x1d] 0x0F)8 | (s16)buf[0x1e]; case 4: event-x4 = (s16)(buf[0x15] 0x0F)8 | (s16)buf[0x16]; event-y4 = (s16)(buf[0x17] 0x0F)8 | (s16)buf[0x18]; case 3: event-x3 = (s16)(buf[0x0f] 0x0F)8 | (s16)buf[0x10]; event-y3 = (s16)(buf[0x11] 0x0F)8 | (s16)buf[0x12]; case 2: event-x2 = (s16)(buf[9] 0x0F)8 | (s16)buf[10]; event-y2 = (s16)(buf[11] 0x0F)8 | (s16)buf[12]; case 1: event-x1 = (s16)(buf[3] 0x0F)8 | (s16)buf[4]; event-y1 = (s16)(buf[5] 0x0F)8 | (s16)buf[6];