proteus仿真四个外部中断按键+1602液晶技巧.doc

Proteus仿真外部中断，共4个按键，控制1602液晶显示，基于MSP430F249 程序1（库文件KU.h）： /**************************************************//**** //延时设置~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~// //*********************************************************** #define CPU_F ((double)4000000) ////主时钟的频率4MHz #define delay_us(x) __delay_cycles((long)(CPU_F*(double)x/1000000.0)) #define delay_ms(x) __delay_cycles((long)(CPU_F*(double)x/1000.0)) #define RS0 P3OUT = ~BIT0 #define RS1 P3OUT |= BIT0 #define RW0 P3OUT = ~BIT1 #define RW1 P3OUT |= BIT1 #define EN0 P3OUT = ~BIT2 #define EN1 P3OUT |= BIT2 //***************************************************// //时钟设置 //************************************************// //驱动1602************************** void LCD_write_com(unsigned char com) { RS0; RW0; EN0; P1OUT = com; delay_ms(1); EN1; delay_ms(1); EN0; } void LCD_write_data(unsigned char data) { RS1; RW0; EN0; P1OUT = data; delay_ms(1); EN1; delay_ms(1); EN0; } void LCD_clear(void) { LCD_write_com(0x01); delay_ms(1); } void LCD_write_str(unsigned char x,unsigned char y,unsigned char *s) { if (y == 0) { LCD_write_com(0x80 + x); } else { LCD_write_com(0xC0 + x); } while (*s) { LCD_write_data( *s); s ++; } } void LCD_write_char(unsigned char x,unsigned char y,unsigned char data) { if (y == 0) { LCD_write_com(0x80 + x); } else { LCD_write_com(0xC0 + x); } LCD_write_data( data); } void LCD_init(void) { EN0; delay_ms(1); LCD_write_com(0x38); delay_ms(1); LCD_write_com(0x0C); delay_ms(1); LCD_write_com(0x06); delay_ms(1); LCD_write_com(0x01); delay_ms(1); } 程序2：主文件 #include msp430f249.h #include KU.h unsigned char A1; unsigned char A2; unsigned char B1; unsigned char B2; unsig