CARS显微光路常用光源激光器分类.docVIP

CARS显微光路常用光源激光器分类 新加坡黄志玮组 The output of a femtosecond Ti:sapphire laser wavelengths tunable from 700 to 1000 nm, pulse duration of 120 fs, spectral linewidth full width at half maximum FWHM of 8 nm, repetition rate of 76 MHz, horizontal polarization, Mira 900, Coherent, Inc. pumped byaNd:YVO4 laser
10 W Verdi, Coherent, Inc. is divided into two parts by a beam splitter. One of the beams works as the pump beam, and the other is used to pump an optical parametric oscillator wavelengths tunable from 1100 to 1600 nm, Coherent, Inc. to produce the Stokes beam. 探测那聚苯乙烯小球，只需要泵浦光是2~4mw，探测光是0.5~2mw就能产生 他们开始有的实验用的物镜的数值孔径也就是才0.95就行~ （2006）加州大学小组 Femtosecond pulses for the pump/ probe and Stokes beams are generated by a home-built Ti:Sapphire oscillator and are amplified by a regenerative amplifier (90 fs, 1 kHz, Spectra Physics, Spitfire) before entering an optical parametric amplifier (OPA) (Light Conversion, TOPAS) that generates the near-infrared idler pulse for the Stokes beam (?s). The degenerate pump/probe beam (?p/?p′) is generated by using a small amount (5%) of the s-polarized 800 nm beam from the amplifier, which is picked off by a beam-splitter before entering the OPA. This pulse makes four passes between two gratings (800 nm blaze, 830 grooves/mm, Edmund Industrial Optics), stretching the pulse in time due to the induced linear negative temporal chirp, and resulting in the blue frequencies of the pulse leading the red frequencies in time. The near-infrared (2100 nm) s-polarized idler beam from the OPA is frequency-doubled by a BBO crystal to a p-polarized 1050 nm Stokes beam, and temporally overlapped with the pump/probe beam by using a delay stage. The average powers of the pump/ probe and Stokes beams can be varied from 0.2 to 10 mW and 0.02 to 2 mW, respectively. The Stokes beam is tunable from 800 to 1175 nm, corresponding to Raman shifts from 0 to 4000 cm 1, when employing the appropriate optics for spatially overlapping the pump/probe and Stokes pu