工程造价3.3.4砌筑工程.pptVIP

Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 3 应扣除(或并入)的体积 计算墙身工程量时，应扣除过入洞、空洞、门窗洞口、嵌入墙身的钢筋混凝土柱和梁(包括过梁、圈梁、挑梁)、暖气包、壁龛，以及面积在0.3m2以上的孔洞的体积； 不扣除梁头、板头、梁垫、檩木、垫木、木楞头、沿椽木、木砖、门窗走头、木筋、铁件，以及砖墙内的加固钢筋的体积； 不另算突出墙面的窗台虎头砖、压顶线、山墙泛水、烟囱根、门窗套、三匹砖以内的腰线和挑檐等的体积； 要并入砖垛、附墙烟囱、三匹砖以上的腰线和挑檐等的体积 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 不扣除 不另算 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 三匹砖以内不计算，三匹砖以上要计算 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. [例4 ]如图所示单层建筑，内外墙用M5砂浆砌筑。假设外墙中圈梁、过梁体积为1.0m3，门窗面积为15.40m2；内墙中圈梁、过梁体积为0.4m3，门窗面积为1.5m2，顶棚抹灰厚10mm，试计算砖墙砌体工程量。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 【解】外墙长：L=（5.00+9.00）×2=28m 内墙净长：L=5.00-0.365=4.635m Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 高度H： H=3.88m 外墙体积 V外=（28.00×3.88-15.40）×0.365-1.0=33.03m3 内墙体积 V内=（4.635×3.88-1.50）×0.24-0.40=3.56 m3 ? 墙体总体积V=33.03+3.56=36.59 m3 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 外墙中心线长度=（11.1+4.5）*2=31.2m 内墙净长线长度=（4.5-0.24）*2=8.52m 外墙高度=4.2+0.9=5.1m 内墙高度=4.2m 门窗面积=1.2*2.4+0.9*2*2+1.8*1.8*5=22.68m2 圈梁体积=（31.2+8.52）*0.24*0.18=1.72m3 砖砌体体积=39.61m3 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 某建筑物平面、立面如图所示，墙身为M5.0混合砂浆，外墙370，内墙为240。 M-1：1200mm×2500mm M-2：900mm×2000mm C-1：1500mm×1500mm 门窗洞口均设过梁，过梁宽同墙宽，高均为120mm，长度为洞口宽加500mm，构造柱为240×240mm（2.72m3），每层设圈梁，圈梁沿墙满布，高度200mm（4.73m3）。