Linux9网络管理.docxVIP

一、网络接口配置【查看网卡信息】1. ifconfig*错误和丢弃数据包数量，与网络质量有关；溢出数据包总数通常与缓冲区大小及收发数据包速率有关。2. 查看所有网络接口（包括被禁用）ifconfig -a3. 查看IP地址：ip address show1: lo: LOOPBACK,UP,LOWER_UP mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 brd 127.255.255.255 scope host lo inet 127.0.0.2/8 brd 127.255.255.255 scope host secondary lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever2: eth0: BROADCAST,MULTICAST,UP,LOWER_UP mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:6b:8d:81 brd ff:ff:ff:ff:ff:ff inet 192.168.233.129/24 brd 192.168.233