下面是详细WPS2000注释工作过程的代码1.docVIP

下面是详细注释工作过程的代码： #define RX_BEGIN_BYTE 0XAA void sendchar1(unsigned char c) //串口1发送与计算机相连 { UDR1 = c; while(!(UCSR1A 0x40)); } void sendchar0(unsigned char c) //串口0发送与KWP2000相连 { UDR0 = c; while(!(UCSR0A 0x40)); } #pragma ctask delay /*delay dt+1 us */ void delay(unsigned int dt) { while(dt) { WDR(); //ICC编译器 复位看门狗 喂狗 NOP(); NOP(); NOP();  dt--; }  } #pragma ctask wakeup //150ms void wakeup(void) { delay(50000); delay(50000); delay(50000); delay(50000); delay(50000); delay(50000);  } void wa