论文(滑动联接).pptVIP

2006技术论文Technical Article 滑动联接用弹簧触指的参数与性能关系简析 Primary Analysis for The Connections between Paraments and Performance of Spring Contact in Sliding Connection 常州森源开关有限公司 CHANGZHOU SENYUAN SWITCH Co,Ltd. 叶丽萍 Ye Liping 2006技术论文：滑动联接用弹簧触指的参数与性能关系简析 摘　要：本文介绍、比较了真空断路器灭弧室动端的多种联接方式，主要就固封极柱内滑动联接方式中弹簧触指的尺寸参数与真空断路器机械、电气性能间的关系进行了简单的计算和分析，并结合实际尺寸和试验结果进行了统计和分析。 关键词： 固封 滑动联接 弹簧触指 尺寸参数与性能的关系 参考资料：［1］清华大学出版社《高压断路器原理和应用》 ［2］BAL SEAL技术宣传资料 ［3］高等教育出版社《机械原理》第四版 Abstract: In this article, some connection ways of VCB’s VI moving parts are introduced and compared, especially simple calculation and analysis are carried out about the relations between demention paraments of spring contact in sliding connection of embedded pole. That also combined actual dementions and tests results. Keywords: Embedded pole, Sliding connection, Spring contact, Relations between demention paraments and performance Reference Material: 主要内容Main Content 1. 联接方式概述 2. VCB产品机械性能与弹簧触指参数的关系和要求 2.1 机械特性对弹簧触指参数的要求 2.2 机械寿命与弹簧触指参数的关系 3. VCB产品电气性能与弹簧触指参数的关系 3.1 热稳定参数与弹簧触指参数的关系 3.2 动稳定性能与弹簧触指参数的关系 3.3 VCB长期通电电流与弹簧触指参数的关系 4. 结语 1. Summary of connections 2. Connections and requirements of VCB’s mechenical performance and spring contact’s paraments 2.1 Requirements of mechenical characteristic 2.2 Connections of mechenical endurance and spring contact’s paraments 3. VCB’s electrical performance and spring contact’s paraments 3.1 Connections between short-circuit withstand time and spring contact’s paraments 3.2 Connections between withstand current peak value and spring contact’s paraments 3.3 Relations of rated current and spring contact’s paraments 4. 1.联接方式概述Summary of connections 1.2 滚动联接Roll connection： 这种联接方式在ABB普通绝缘筒式的VD4大电流断路器上使用（如图），下出线座内装有多组滚子，工作时，通过滚动摩擦使滚子夹在动导电杆和下出线座之间上下滚动，实现可靠的联接。这种联接制造工艺复杂，生产成本高。 Complex manufacture, high cost. 1.联接方式概述Summary of connections 1.3、 滑动联接Sliding connection： 目前常见的滑动联接方式主要采用滑动触指，滑动触指有两种：