JYQ-IV浮游细菌采样器英文说明书.docVIP

INDEX I. Principle introduction 2 II. Using environment 2 III. Main features and parameters 2 IV: Structural features explanation 3 V. Operation instruction 4 VI. Maintenance and matters needing attention 7 VII. Regular failure treatment 9 VIII. Annex 11 I. Principle introduction JYQ-IV air biological sampler is a kind of highly effective air biological sampler with multi-hole. It is designed according to the principle of particle bombardment and isokinetic sampling, directly sampling, keeping wind speed of sampling and that of clean room consistent basically, and reflecting consistence of animalcule in clean room more truly. When sampling, air with puffball will be bumped on agar surface of substrate utensil through the tiny hole; these animalcules grow quickly in the course of substrate, thus, the result will be got quickly. II. Using environment Temperature: 10--35℃ Relative humidity: 10--90﹪RH Atmospheric pressure: 80-110kPa Maximum dust content: 100000000 / m3@0.5μm or 0.2mg/m3 Maximum wind speed: 1m/s III. Main features and parameters Sampling hole has many small holes to reduce puffball superposition and reduce error of animalcule count. Sampling flow: 100L/min. Flow speed of the sampling port: 0.38m/s.Basically the same as the wind speed of the clean room (constant speed sampling). The sampling quantity could be set from 0.01-2.0m3. Use the standard and universal culture dishΦ90*15mm. Power supply: AC/DC. Built-in battery DC7.4V, 6400mAH. Continuous 8 hours working time after charge. Size of appearance: Φ120*300 。 Weight: 2kg IV: Structural features explanation The sampler is composed by upside and downside two parts. The upside includes the sampling head, culture dish pedestal, sampling pump, sampling pump pedestal and sampling pump power supply. The downside includes the control panel, memorizer, LCD monitor, keyboard, battery package, please refer to the picture. The sampler could be used with AC/DC. There is a switch and jack at the back bottom of t