压力传感器的效验和精度测量..doc

本科毕业论文 摘 要 新研制或生产的压力传感器需对其技术性能进行全面检定,以保证量值的准确传递。经过一段时间储仔、使用或修理后的压力传感器，也必须对其主要技术性能再次进行鉴定，以确保其性能指标达到要求.压力传感器的标定系统通常由标定发生器、标定测试系统，以及待标定压力传感器所配接的信号调节器和显示器、记录器等组成。 压电陶瓷具有响应速度快，容量大等诸多优点，并且其易于制备，该产品可制成任何形状和偏振，热，湿，方向和通过改变化学成分，就可以得到各种不同的采用压电陶瓷。随着压电陶瓷应用的不断扩大，压电器件作为精密驱动，其自身的性能越来越方便用户的关注。本文的压力传感器和压电陶瓷的性能，基本功能，采用的原理作一介绍，并且它的功效和分别缩放。 关键词：压力传感器；压电陶瓷；特性；效验；定标 Abstract The newly developed or manufactured pressure sensors need to be fully characterizing its technical performance to ensure accurate transmission of values. After a period of storage, Aberdeen, use or repair after the pressure sensor must also be re-appraisal of its main technical performance to ensure that its performance indicators have reached the requirements of the pressure sensor calibration system usually consists of calibration generator, calibration and test system, and to be calibration composition signal conditioner and monitor, the recorder is connected with the pressure sensor and the like. 牋h The piezoelectric ceramics with fast response, high capacity and many other advantages, and it’s easy to prepare, the product can be made in any shape and polarization, heat, humidity, direction and by changing the chemical composition, and you can get a variety of piezoelectric ceramics. With the continuous expansion of the piezoelectric ceramic applications, piezoelectric device as a precision drive, its own performance increasingly users attention. Sensors and piezoelectric ceramic performance pressure of this article, the basic function, as an introduction to the principles, and its efficacy and zoom respectively. Key words: The piezoelectric ceramic pressure sensor calibration checksum feature 目 录 摘 要 I Abstract II 目 录 III 绪 论 1 1 传感器概述 1 1.1 传感器的组成和分类 1 1.2 传感器的基本特性 2 1.2.1 传感器的静态特性 2 1.2.2 传感器的动态特性 3 1.3 传感器特性的应用 4 2 压力传感器 4 2.1压力传感器的概述 4 2.2压力传感器的特征 5 2.3压力传感器的选用 5 3 利用压力传感器测量压强 6 3.1测量压强的原理 6 3.2 压力传感器测量压强的装置设计 6 3.3 用实测的数据对压力传感器定标 7 4 压电陶瓷