Motion(DCX12,BCC00,DXE00)外觀檢驗標準A02.doc.DOCVIP

COMPAL CONTROLLED PRINT To hide the template instructions, select “Tools”, “Options”, “View” tab, remove check in “Hidden Text”. Re –check “Hidden Text” to view the instructions. Similarly, select “Tools”, “Options”, “Print” tab and check, or remove check to print or not print the instructions on the document. Please submit the document with the template instructions hidden. DO NOT REFORMAT THIS TEMPLATE! Once the instructions are hidden, the document paragraphs will align correctly on the pages. Type in the title of the Dell Specification over the word “Title”. Type in the document Number, Revision, Author and Owner to the right of those items. If “Previous Owner” information applies, type in the Previous Owner, otherwise, delete that row. DCX12/BCC00/DXE00外觀標准. Title: SPEC, Compal,　injection, Reliability, Painting-STD﹐ Revision: A01 For initial approval of the document, type in the appropriate Approval Authorities and obtain their approval for the initial released revision along with the date approved. Approval Authorities Approval Signatures Revision Date Approved Hank_ zhou A00 5/3/2004 Hank_zhou A01 5/20/2004 Hank_zhou A02 5/24/2004 A00--(A01: Update painting gloss and color deviation Add antenna cover overlap spec(0~0.3mm) A01--(A02 1.Update the painting reliability test standard 目錄﹕ 圖面簡介(A,B,C面)第3頁 檢驗規範和不良定義第4頁 三． 噴漆面 噴漆面外觀標准第5頁 光澤﹐色差﹐膜厚第6頁 C. 噴漆面性賴性測試標准第6頁 印刷要求第7頁 四 ．壓克力板檢驗標準第8頁 一,圖面簡介(外觀面定義) 二:檢驗規範和不良定義 檢驗條件定義 1.1 檢驗燈光定義 亮度依廠房Normal採光為準(LUX700~1500) 1.2檢驗距離定義 目視距離以A級面35cm,B級面50cm,C級面60cm為準 1.3檢驗時間定義 每個面檢驗停留時間5~6Sec. ２. 檢驗方法定義 檢驗人員拿取產品時使產品與水平方向成30度, 沿垂直軸向左30度及向右30度邊旋轉邊檢查. 若產品有多個面,則每面均要求按此規範檢驗 3. 不良現象解釋 3.1毛屑:空氣中漂浮的纖維落於工件表面而造成的不良.分同色毛屑及異色毛屑.同色毛屑為噴漆前落於工件表面或油漆內而形成,異色毛屑為噴漆後產品在未完全烘干前有纖維落於表面而造成.長度為毛屑的曲線長度. 脫漆:由於工件表面有油脂或其他物質,造成噴漆後油漆無法附著而造成的油漆脫落,此類不良工件底色可見.此標準中此不良現象不可接受. 3.3 顆粒:工件表面較小的凸起點 3.4 刮傷:刮傷分有感刮傷及無感刮傷.