After cable installation.docVIP

After cable installation, should check whether there is any damage on optical fiber, and the loss of fiber optic cable laying of parking; Make sure no damage, and then succeeded. After the cable laying, appropriate measurement channel total loss, and fibre channel to the waveguide optical time-domain reflectometer observation attenuation characteristic curve. For example, conference television system network related to the transmission distance. With coaxial cable network in within 300 meters, 300 meters with the optical fiber transmission. 1 h414043 building intelligence engineering commissioning test requirements After the completion of the building intelligence engineering construction, must carry on the system commissioning test, ensure system can enter the normal operation. The main topic is: this article building intelligence engineering test implementation; Detection of building equipment automatic monitoring system; Safety engineering commissioning test requirements. A, inspection of the implementation of the intelligent building system 1. By construction unit (or engineering contractor) to the inspection agency application system, at the time of going through the formalities for detection of entrust, as-built documents shall be submitted to examination organization system technical documents (including equipment), system test report, project contract technical files, system design, etc. 2. The equipment used in building intelligence engineering, materials, interface and software of the project such as functionality, performance, testing should be according to national standards and design requirements and provisions of the contract. 3. The intelligence engineering test should be according to the contract of engineering technical document and construction drawing design, design change description, regarding the record, product technical documents. 4. The testing scheme should be in line with the engineering construction quality acceptance of norms, a