the typethe type.doc

the type; Evaluation of value; ^; Evaluation factors; A; Satisfaction (%); B; Weight (%). By the above formula to calculate the maximum value of s is the choice of scheme. 3. The main construction method of economic analysis: large, heavy, high precision, high value of transportation of the equipment, or suspended Loading plan; Large, thick, large amount of welding and important parts or have special requirements of welding construction plan; Large quantities, pay more Fork of the project construction organization plan; Special assignment scheme; Site prefabrication and factories; Test and integrated system Nondestructive testing; Traditional technology and adopting new technology, new process; The key process technology solutions, etc. 4. The construction scheme of the technical and economic comparison (1) technical sophistication 1) compare the technology level of each scheme, such as the national, provincial level, industry, etc. 2) is the technology innovation of these schemes, such as breakthrough, fill the gap, to lead. 3) comparing the scheme of technical efficiency, such as lifting technology of lifting tonnage, each time interval, lifting the diameter of the fan Wai, lifting height, etc.; Can adapt to the parent metal welding technology, welding speed, the deposition efficiency, adapt to welding position And so on; Nondestructive testing technology of single chip, chip X-ray detector, etc.; Measurement technology in the plane, space, automatic recording, and painting Figure, etc. 4) comparing the scheme innovation points, such as the point of this scheme is the ratio of the total technical points. 3121 h420000 mechanical and electrical engineering project construction management Scheme (5) to compare the safety, such as reliability, accident rate, etc. (2) the economic rationality is: to compare the one-time investment of the program. Comparing the schemes of the time value of money. Comparing the solution of the environmental impact