MicroMotion科里奥利质量流量计原理介绍讲述.pptVIP

流量计系统部件 流量精度指标 典型精度计算 百分比精度举例 传感器精度曲线 调零步骤 用被测介质打循环约5分钟, 保证满管, 关闭流量计下游阀, 保证流量静止 用变送器上的调零按钮, 或375手操器对流量计进行调零 12/13/96 8 Introduction and Theory, Part II (= Transparency 26) The transmitter uses the temperature read from the RTD and the DTC factor to adjust the registered tube period for the effect of temperature on the tubes’ response. The transmitter uses the square of the tube period to eliminate the effect of the mass of the tubes themselves (see TX-145 in 1A.PPT). The function is fundamentally linear (as shown in TX-25), so the transmitter can use the slope-intercept method to determine