正脉冲MWD系统操作流规程(现行)新的试题.ppt

八、资料验收 填写：上井时的资料，应在返回时基本填写完毕，对仪器的运行记录要填写清楚，返回后只需要填写入库检查等返回测试情况，保留的信号曲线要准确。象运行记录、故障记录、信号曲线等应该在仪器运行一趟钻之后就填写完毕。不能等到返回后再填写。填写时要保持资料的准确、真实。 验收：主岗填写好资料后，由副岗检查，然后找各个部门人员签字，在上交签字前，由本井技术监督进行复审。 * 1.Metal cleaner and rags only for critical seal areas 2.Geolink provide drawings for all subs and customer manufactures themselves . Make long as possible within geolink dimensions to allow for several recuts. Don’t relieve pin for easy recut * 1.Check all seal areas are clean and free from dirt and that screw holes are free of mud 2. Install transmitter into sub and align clamp bolt holes with hol