聚丙烯酸酯乳液的合成2012讲试卷及答案.pptVIP

方 框 流 程 图 涂刷表干 再刷干燥 出料冷却 测η调PH 停止加热 冷却拆卸 成膜光泽 好达终点 保温聚合 取样检查 取样2.00g 测固含量 计算加水 搅拌调PH 助剂增稠 搅拌填料 基材裁切 打磨洗晾 * * 水性木器清漆制备工艺流程图 * 内外墙建筑乳胶漆的工艺流程示意图 * 核壳型柔性硅丙乳液聚合工艺流程图 * 乳液聚合生产工艺流程 * Procedure 1. Measure 33ml of non-ionic water into 100ml of beaker , then heat it to about 50℃. Weigh surface active agents and add it into beaker , stir for 10 min to dissolve them . 2. Weigh and add monomers into surfactant solution in beaker, stir for 30 min at 30℃ under vigorous agitation to emulsify them into homogenous emulsion . * 3. Add 12 ml of emulsion mixture into three necked round bott