[机械优化设计.docxVIP

机械优化设计课程大作业 班 级： 机械11005班姓 名： 叶森班级序号： 20课程教师： 袁新梅学 期： 2012-2013学年 第2学期完成时间： 2013/月份/日期1、h=[2 -4;-4 4];f=[1;-1];lb=zeros(2,1);a=[2 1;-1 2];b=[2;2]; [x,fval,exitflag,output,lambda]=quadprog(h,f,a,b,[],[],lb)Warning: Large-scale method does not currently solve this problem formulation,switching to medium-scale method. In quadprog at 236Optimization terminated.x = 0 0.2500fval = -0.1250exitflag = 1output = iterations: 2 algorithm: medium-scale: active-set firstorderopt: [] cgiterations: [] message: Optimization terminated.lambda = lower: [2x1 double] upper: [2x1 double] eqlin: [0x1 double]ineqlin: [2x1 double]2、 f=[-1;-2;-1];a=[2 1 -1;2 -1 5;4 1 1];b=[2;6;6];lb=[0;0;0]; options=optimset(simplex,on,display,iter,largescale,off);[x,fval,exitflag,output,lambda]=linprog(f,a,b,[],[],lb,[],[],options)The default starting point is feasible, skipping Phase 1.Phase 2: Minimize using simplex. Iter Objective Dual Infeasibility f*x A*y+z-w-f 0 0 2.44949 1 -1 2.12132 2 -4 3 3 -10 0Optimization terminated.x = 0 4 2fval = -10exitflag = 1output = iterations: 3 algorithm: medium scale: simplex cgiterations: [] message: Optimization terminated.lambda = ineqlin: [3x1 double] eqlin: [0x1 double] upper: [3x1 double] lower: [3x1 double]4、h=[1 0;0 1/3];f=[0;0];lb=zeros(2,1);aeq=[1 1];beq=[1];[x,fval,exitflag,output,lambda]=quadprog(h,f,a,b,aeq,beq,lb)Warning: Large-scale method does not currently solve this problem formulation,switching to medium-scale method. In quadprog at 236Optimization terminated.x = 0.2500 0.7500fval = 0.1250exitflag = 1output = iterations: 1 algorithm: medium-scale: active-set firstorderopt: [] cgiterations: [] message: Optimization terminated.lambda = lower: [2x1 double] upper: [2x1 double] eqlin: -0.2500 ineqlin: [2x1 double]7、某车间生产甲（如轴）、乙（如齿轮）两