2012-06-182132mplayer交叉编译..docVIP

今天开始了新的项目，为了让我们进入项目研究的工作态，这次以正式项目开发的形式分配任务。我主要做的就是移植mplayer，在开发板上实现视频播放。 1、下载源码包 apt-get source mplayer 2、安装yasm apt-get install yasm 3、进入source包 配置configure参数 ./configure --host-cc=gcc --cc=arm-linux --target=arm-armv4-linux --prefix=/tmp/mplayer --disable-win32dll --disable-dvdread --enable-fbdev --disable-mencoder --enable-mad4、make 5、make install  参考configure配置： #./configure --host-cc=gcc --cc=arm-none-linux-gnueabi-gcc --target=arm-linux --enable-static --enable-ossaudio --prefix=/tmp/mplayer-rc2 --disable-win32dll --disable-dvdread --enable-fbdev --disable-mencoder --disable-live--disable-mp3lib --enable-mad--enable-libavcodec_a --disable-armv5te --disable-armv6 --disable-dvdnav --disable-dvdread --disable-dvdread-internal with-extraincdir=/usr/local/arm/3.3.2/lib/include --with-extralibdir=/usr/local/arm/3.3.2/lib/lib 参数解析： --host-cc=gcc # C compiler fortools needed while building [gcc] --cc=arm-none-linux-gnueabi-gcc #Ccompiler to build MPlayer [gcc] --target=arm-linux #targetplatform (i386-linux, arm-linux, etc) --enable-static #builda statically linked binary --enable-ossaudio #enableOSS audio output [autodetect] --prefix=/tmp/mplayer-rc2 #prefixdirectory for installation [/usr/local] --disable-win32dll # disable Win32 DLL support [enabled] --disable-dvdread #disablelibdvdread [autodetect] --enable-fbdev #enableFBDev video output [autodetect] --disable-mencoder #disableMEncoder (A/V encoder) compilation [enable] 使能编码器编辑 --disable-live #disableLIVE555 Streaming Media [autodetect] 让Mpalyer不支持流媒体协议 --disable-mp3lib #disable builtin mp3lib [enabled] --enable-mad #disablelibmad (MPEG audio) support [autodetect] --enable-libavcodec_a #disablestatic libavcodec [autodetect] --dis