常用仪表图例及缩写..docVIP

MANUALLY OPERATED VALVES By adding an actuator to the basic valve symbol ,the valve becomes a control valve . Other valves Indicated proper abbreviation under valve, example 2-6″-WB-134-J1B7-FHC-1．5″ UNIT NUMBER单元编号 LINE SIZE管线尺寸 SERVICE SYMBOL用途符号 LINE NUMBER管线编号 PIPING SERVICE SPECIFICATION管道用途描述 TYPE OF INSULATION OR TRACING绝缘类型或保温 LINE INSULATION THICKNESS管道保温厚度 INSULATION CODE保温代号 FCC Full cold conservation完全保持冷却 FHC Full heat conservation完全保持伴热 PHC Partial heat conservation局部保持伴热 PP Personnel protection个人防护 NI No insulation无保温 ST Steam traced and insulated蒸汽伴热 ET Electric traced and insulated电伴热 INSTRUMENT NUMBERING PHILOSOPHY X--XX--XXX—X Multiple instrument designator多种仪表指示 Loop number/Intrument tag回路编号或仪表位号 Section number/Intrument code区域编号或仪表代号 Train number顺序编号 PIPING SYMBOLS管道符号 GENERAL概述 LINE SYMBOLS管道符号 ABBRIVATIONS缩写 AG—Above Ground 地面 HP—Horse Power Or Highpressor马达或高压 ATM—Atmosphere 大气 H.PT—High Point 高点 BF—Blind Flange 肓法兰 IAC—Insulation Acoustic隔音 BHP—Brake Horse Power马达闸 LC—Lock Closed 锁定关 BL—Battery Limit 电池限额 LO—Lock Open 锁定开 BW—Backwash 逆流 LH—Lock Hopper 锁斗 CC—Chemical Clean化学清洗 LP—Low Pressure 低压 CH OP—Chain Operated连续运转 L,PT—Low Point 低点 CP—Corrosion Probe 防腐蚀探测器 M—Motor Or Motorized Actuator电动机或电动执行器 CSC—Car Seal Closed 气缸密封关 MW—Manway人行道 CSC—Car Seal Open 气缸密封开 NC—Normally Closed常闭 D—Drain 排放 NDE—Normally Deenergized正常不带电 DE—Deenergized 不带电 NE—Normally Energized正常带电 E—Energized 带电 NNF—Normally No Flow正常无流量 (E)—Existing 当前的 NO—Normally Open常开 (F)—Furnished 供应 PD—Positive Displacement实际置换 F＆P--Furnished＆piped供应或管道传输 PV—Process Variable进程变量