激光产品资料分析.ppt

激光产品分类及适用机型： 打印机原理 图像形成第一步：充 电 图像形成第二步：写录（曝光） 图像形成第三步：显影 图像形成第四步：转印 图像形成第五步：定影 图像形成第六步：清 洁 图像形成第七步：消电 缺陷分析步骤： 缺陷：规律性黑块 缺陷：规律性字迹模糊 缺陷：整体色浅 缺陷：撒粉 缺陷：竖直漏印 缺陷：水平漏印 缺陷：竖直条纹 缺陷：水平条纹 缺陷：全黑版 缺陷：全白版 缺陷：纸张偏斜 缺陷：底灰 缺陷：感光鼓针孔 缺陷：金钱斑 缺陷：定影不牢、定影蹭脏（正鬼影）、空心字 * 打印机耗材有限公司 激光产品 纳思达研发中心 激光产品的分类及适用机型图 一体式碳粉盒(HP系列,CANON系列） 分体式碳粉盒适用于Brother/Toshiba/ Mita/Oki/Panasonic/Canon/Ricoh等系列机型 填充碳粉（HP Laserjet系列， Canon Laserjet 系列） 1.0 充电  conditioning 2.0 写录（曝光） writing3.0 显影 Developing4.0 转印 Transferring 5.0 定影Fusing6.0 清洁 Cleaning 7.0 放电 Discharging Conditioning is to apply a uniform negative charge onto the rotating Organic Photo-Conductor(OPC) drum surface via corona wire assembly or primary charge roller. 通过电晕组件或充电辊给转动的感光表面充上一层均匀的负电荷。 Image Formation stage one:Conditioning(charging) In this stage,the laser beam with digital signal makes contact with the OPC drum surface. The exposed area becomes conductive and discharges the surface chanrge to round ,forming a electric latent image on the drum surface. 携带数字信息的激光束扫描感光鼓表面，接受激光照射的鼓表面变为导体，静电荷消失，在鼓的表面形成了电位不一静电潜像。  Image Formation stage two:Writing Developing is to convert the electric latent image into visible toner image at the developing station. Toner is attracted onto the mag sleeve magnetically from the toner hopper,and charged via friction between the mag sleeve and the docter blade.The doctor blade also evenly meters the toner amount on the mag SLEEVE.An AC/DC voltage give the toner a negative charge bias and transfers the toner to the OPC. 在显影区，感光鼓表面的静电潜像变为可视的碳粉图像。首先碳粉被吸引到磁辊表面。在出粉刀的控制下，在磁辊表面形成一特定厚度的均匀碳粉层，并通过磨擦使碳粉带电。再通过AC/DC偏压作用，使碳粉在磁辊表面震动，并转移到OPC上。OPC上的潜像区吸引碳粉，从面形成可见的碳粉图像。 Image Formation stage three:Developing The drum with toned image rotates and contacts with the media that delivered by the delivery system at the same rate.An opposite charge is placed on the backside of paper by the transfer roller.The charge attracts the toner from the drum onto the media. 携带碳粉图像的鼓转动，并与同样速度的纸相遇。转印辊给纸背面施以