50kW循环式空气源热泵热水机组设计（参考）.docVIP

本科毕业设计（论文） 50kW循环式空气源热泵热水机组设计 学 院 材料与能源学院 专 业 热能与动力工程 （制冷与空调方向) 年级班别 学 号 2011年 6月  广东工业大学本科生毕业设计（论文）任务书 题目名称 50KW循环式空气源热泵热水机组设计 学 院 材料与能源学院 专业班级 热能与动力教研室 姓 名 学 号 一、毕业设计（论文）的内容 熟悉空气源热泵机组的工作原理。 根据空气源热泵的要求，选择合适的压缩机型式。 进行冷凝器和蒸发器的热力计算以及管道阻力计算，并计算水箱容积。 完成换热器图纸的绘制。 分析不同设备的性能特点。 二、毕业设计（论文）的要求与数据 设计目标：空气源热泵热水机组设计 计算工况：选用压缩机1台，工质R22，制热量50KW，冷凝温度twl＝50℃。采用管壳式冷凝器和管翅式蒸发器，蒸发温度t0=10℃。 三、毕业设计（论文）应完成的工作 完成工况选择压缩机负荷的计算蒸发器的详细计算冷凝器、等的详细计算管壳式冷凝器管翅式蒸发器 Abstract The design of 50W Circulating Air-source Heat Pump Heating Water Machine Unit has been finished through the efforts of over ten weeks. Nine parts are included in the content of this design. They are introduction, confirmation of the design parameter, brief introduction and optimization to the operating principles of tube-shell type condenser and tube-fin type evaporator, design of tube-shell type condenser and tube-fin type evaporator, selection of compressor, selection and calculation of pipeline, selection of auxiliary equipment and calculation of refrigerant charge. The paper makes a detailed description as follow: (1) the effect of energy, the storage of energy and the structure of energy use in China; (2)the history of air-source heat pump; (3)the study signification of heat pump heating water machine unit; (4)the operating principles of heat pump. The demands and the datas of this design are as follow, calculating the working condition: choosing 1 compressor, R22 working medium, 50KW heating capacity, and the condensing temperature＝50℃. It should be choose tube-shell type condenser and tube-fin type evaporator, and the evaporation temperature=10℃. The choices of the working condition in this design are as follow: the condensing temperature is 50℃, the evaporation temperature is 10℃, the temperature differences between the entrance and exit waters in condenser is 15℃, and when the chilled water passes the condenser once, its