HPRX7620同过两个SANswitch连接EMCcx400..docVIP

硬件环境： HP RX7620 同过两个SAN switch 连接 EMC cx400 软件环境：HPUX 11.23 在HP RX7620上安装下面软件: Software in configuration Part Number Revision Navisphere Agent 4.3 PowerPath 4.3 注解: EMC PowerPath? 软件是一种驻留在服务器上、可增强性能和应用程序可用性的软件解决方案。PowerPath 将多路径输入/输出功能、自动负载平衡、路径故障切换和逻辑卷 管理功能组合在一个集成软件包中。PowerPath 支持连接到EMC Symmetrix? EMC CLARiiON? 和Hitachi Data Systems (HDS) Lightning 网络存储系统的服务器（包括群集服 务器）。PowerPath 软件驻留在开放的服务器平台上，在交换结构和仲裁回路环境中均支持 SCSI 和光纤通道。通过PowerPath，您能够利用最高的可用性和性能以及业界领先的 信息存储系统的所有优点，满足快速增长的服务级别。 安装Navisphere Agent 4.3 Install Navisphere Agent and CLI on an HP-UX server Verify the following requirements have been met before continuing: The HP-UX host is running a supported distribution of HP-UX. The supported HBA hardware and driver are installed. That the disk-array storage system(s) is connected to the HP-UX server where you are installing Agent. Mount the CD-ROM or DVD-ROM: If the directory cdrom (dvdrom) does not exist, create it with the following command: mkdir /cdrom Execute the following command to mount the CD-ROM (DVD-ROM): mount devicename /cdrom Install the Agent files and the CLI: At the command prompt (#) in an hpterm window, execute the following command to specify the CD-ROM (DVD-ROM) as the source depot:/usr/sbin/swinstall –s /cdrom/NAVIAGNT.DEP\;1 –x mount_all_filesystems=false The SD-Install Software Selection dialog box opens. In the software selection area of the SD-Install Software Selection dialog box, select (highlight) one of the following: 标记NAVICLI (to install the CLI)和NAVIAGENT (to install the Host Agent) When the installation completes, click Done. File ? Exit Modify user login scripts: Use a text editor to modify your login scripts as described below: $HOME/.profile or in $HOME/.cshrc, and export each path: Add the text /opt/Navisphere/bin to PATH Add the text /opt/Navisphere/man to MANPATH Add the text /usr/lib:/usr/lib/X11R5:/opt/Navisphere/lib to SHLIB_PATH navicli -h hostname port -list –hba（hostname is