Linuxiscsimultipath..docxVIP

Linux iscsi multipath using active/active環境Red Hat 5.5 *1兩張網卡01Free NAS *1兩個iscsi port3132設定Iscsi套件安裝Iscsi-initiator-utils-71-0.16.el5.i386.rpmLinux 5.0版本以上就內建了查詢本機的initiatorname[root@redhat5 iscsi]# cat /etc/iscsi/initiatorname.iscsiInitiatorName=.redhat:dfc97048a636在Free NAS端設定target (相當於storage上面建立host)設定兩顆iscsi DISK將DISK mapping 給 targetLinux 網卡設定多個網路PORTiSCSI initiator 預設會依據網路狀態只和 iSCSI Target 建立一個 session,雖然你的網路上同網段的埠有兩個以上.他還是只會建立一個 session.如果我們要使用 iSCSI interfaces (iface) binding 的功能必須要在 /var/lib/iscsi/ifaces 指定多個網路埠.我們可以使用 iscsiadm 的指令來建立.建立 ieth0 和 ieth1??[root@redhat5 ~]# iscsiadm -m iface -I ieth0 --op=new??[root@redhat5 ~]# iscsiadm -m iface -I ieth1 --op=new確定參數內容[root@redhat5 ~]# iscsiadm -m ifacedefault tcp,empty,empty,empty,emptyiseriser,empty,empty,empty,emptyieth1 tcp,empty,empty,empty,emptyieth0 tcp,empty,empty,empty,empty參數檔存放位置[root@redhat5 /]# cd /var/lib/iscsi/ifaces[root@redhat5 ifaces]# lsieth0 ieth1[root@redhat5 ifaces]# cat ieth0# BEGIN RECORD 2.0-871iface.iscsi_ifacename = ieth0iface.transport_name = tcp# END RECORD[root@redhat5 ifaces]# cat ieth1# BEGIN RECORD 2.0-871iface.iscsi_ifacename = ieth1iface.transport_name = tcp# END RECORDLinux 掛載iscsi DISK[root@redhat5 ~]# iscsiadm -m discovery -t sendtargets -p 3131:3260,1 .redhat:dfc97048a63631:3260,1 .redhat:dfc97048a636[root@redhat5 ~]# iscsiadm -m discovery -t sendtargets -p 3232:3260,1 .redhat:dfc97048a63632:3260,1 .redhat:dfc97048a636查看以連結的target[root@redhat5 ~]# iscsiadm -m node31:3260,1 .redhat:dfc97048a63631:3260,1 .redhat:dfc97048a63632:3260,1 .redhat:dfc97048a63632:3260,1 .redhat:dfc97048a636登入所有的target[root@redhat5 ~]# iscsiadm -m node -L allLogging in to [iface: ieth1, target: .redhat:dfc97048a636, portal: 31,3260]Logging in to [iface: ieth0, target: .redhat:dfc97048a636, portal: 31,3260]Logging in to [iface: ieth1, target: .redhat:dfc97048a636, portal: 32,3260]Logging in to [iface: ieth0, target: .redhat:dfc97048a636, portal: 32,3260]Login to [iface: ieth1, target: .redhat:dfc