图书馆毕业设计计算书正文-605..docVIP

本人有土木工程专业各种毕业设计二百多套： 框架、剪力墙、 砖混、框剪等结构 毕业设计；住宅、宾馆、办公楼、教学楼、住宿楼、商场等建筑；高层或多层的毕业设计！计算书及建 筑施工图、结构施工图都是成套的，都是合格的毕业设计，也都是各届优秀毕业生的合格毕业设计！ 意在帮助大家更快的完成毕业设计，以便去实习挣钱！ 有意者请联系我！ QQ ：1317645264 摘要 本建筑名称为“百草园图书馆”，采用现浇钢筋混凝土框架结构，现浇钢筋混凝土楼盖，层数为四层，层高5.1米，维护结构为普通砖砌块填充墙。 本建筑平面为“回”子型，中间为一个小天井增加了层次感，柱网为6米乘6米，走廊处为3.6米。立面简洁大方，采光良好。主入口设在南面，功能分区主要为多功能会议室、阅览区和管理区，会议室可容纳300人，设在顶层。共设四部相同大小的楼梯设在“回”字型走廊的尽头。人流主要有人流较大的南侧主干道方向和北侧办公区方向。建筑周围设大面积的绿地，两侧设有停车区。 此建筑位于青岛经济技术开发区，建筑场地属于Ⅱ类建筑场地；抗震设防烈度为7度，设计地震分组为一组；主要风向：冬天为西北风，夏季为东南风，基本风压0.6kN/m；基本雪压0.2N/m；年平均降雨量为710mm；年最高温度为39℃，最低温度为－12℃；地面粗糙度为C类，季节性冻土深度小于0.5m。结构使用材料：板、次梁、框架梁、基础、雨篷采用C30混凝土，柱采用C40混凝土。板雨篷采用HRB335钢筋,梁、柱、基础采用HRB400受力钢筋和HRB335箍筋。框架计算主要分为内力计算和内力组合然后是截面配筋，恒载活载作用下框架的弯矩计算采用弯矩二次分配法地震和风荷载作用下框架内力计算采用D值法计算，基础形式全部为柱下独立基础，尺寸为两种分别为2.2乘3.6米和2.4乘3.6米。 关键词 图书馆、建筑设计、结构设计、钢筋混凝土框架结构 Abstract This building named baicao garden library, using in-situ reinforced concrete frame structure, reinforced concrete slabs, layer for four-layer, 5.1 m-high, maintain the structure as a normal brick block-filled wall. The floor for return, added sense of depth to a small patio in the Middle, column grid is 6 m x 6 m, 3.6 m corridor. Facades, clean and luxury for good lighting. Located in the South of the main entrance, utility partition main multifunctional conference room, reading area and management areas, meeting room can accommodate up to 300 people, located on the top floor. Total for four stairs of the same size for the back to shape the end of the corridor. Larger passenger flows are the main trunk road on the South side and the north side of the work area. Set up large areas of green space around the building, with a parking area on both sides. This building located in the Qingdao economic and technological development zone, building sites belonging to category II building lots; seismic fortification intensity of 7 degrees, grouped into a set of design earthquake; the main wind direction: Northwest wind in winter, Southeast wind in summer, basic wind pressure0.6kN