材料研究生方向 材料方向.docVIP

材料研究生方向 材料方向 导读：就爱阅读网友为您分享以下“材料方向”的资讯，希望对您有所帮助，感谢您对92的支持! 12.14.4?Assigning a material orientation or rebar reference orientation You can assign a material orientation or a rebar reference orientation. The following sections describe how to assign these orientations: ‖ ‖ Assigning a material orientation The global coordinate system determines the default material orientations. However, you can assign specific material orientations to a shell, solid part, region, skin, or stringer by selecting a datum coordinate system or discrete field or by defining a discrete orientation. For an Abaqus/Standard analysis you can define the local coordinate system in user subroutine . The datum coordinate systems can be rectangular, cylindrical, or spherical; and you can apply an additional rotation to the coordinate system if required. For more information, see . In cases where Abaqus/CAE attempts to draw coordinate systems for material orientations at singularity points of the system (i.e., points for which the user-selected coordinate system and the geometric normal from either geometry or elements cannot be resolved into a valid orientation for display purposes in Abaqus/CAE), the coordinate system will be drawn collapsed. For continuum shell elements, Abaqus/CAE does not project the displayed material orientations onto the midplane surface. You can perform a data check and view the output database in the Visualization module to verify the material orientations. For more information, see . The material orientations that you assign