I4英文翻译.docVIP

Anti-interference Design of single-chip microcomputer system Abstract: MCS - 51 in the use of single-chip applications, the existence of a large number of interference sources, has seriously affected the reliability of system operation. Industrial field of single-chip microcomputer system may have an impact on the various factors that interfere with the analysis of single-chip system, introduced during the design process of hardware and software anti-jamming technology. Key words: microcomputer; interference; antijamming; watchdog Introduction Single-chip measurement and control in industrial automation, process control, intelligent instrumentation applications in areas such as more and more extensive and in-depth. However, the measurement and control system of the scene are often poor working environment, interference is caused by system failures, and one of the main reasons. enter interfere with the role of computer system in the CPU, the typical fault is to undermine the status of program counter PC, resulting in procedures in the address space of running to fly or a death cycle. In industrial applications, serious damage and sometimes interfere with the disruption caused by disruption of the closure means. Therefore, the interference problem is that single-chip design of automatic measurement and control system must address one of the key to. 1 interference and classification And industrial applications as a result of single-chip real-time control at the scene, the working environment of other interference generated by the equipment control system easy to enter , interfere with its work, seriously affecting the normal operation of the system, or even due to malfunction caused by a major accidents, which in single-chip control is not allowed to interfere with the main form of jamming enter to conduction and radiation in two ways enter to the control system. According to interfere with the work of the scene in relation to their different positions, can be di