IDMP100E保护装置英文说明书.docVIP

DMP100E Series Microprocessor-based Protection Monitoring Unit Introduction HUANYU GROUP CO., LTD. DECEMBER, 2010 Contents 1、SUMMARIZE AND APPLICATION SCOPE 2 2、FUNCTIONS AND FEATURE 2 3、Size 6 4、Hardware block diagram 7 5、CONNECTION 8 6、Use Instructions 19 7、COMMON PORTECION AND THEORY 34 Appendix 37 1、SUMMARIZE AND APPLICATION SCOPE DMP100E Series Microprocessor-based Protection Monitoring Device is applicable for the power network at 110kV or less voltage level, which provide protections, control, measure, monitor, and communication for transmission-line, equipment (transformer, electromotor, capacitance, reactance) and have features including protection combination and harmonics analysis. The device can be installed either at switchgear or in a panel-assembling mode. DMP100 can implement all protections and automatization of normal power substation. 1.1.APPLICATION SCOPE Incoming feeder protection and measure Out feeder protection and measure Transformer main protection and measure Transformer standby protection and measure Electromotor protection and measure Electromotor (with differ function) protection and measure Capacitance protection and measure Standby power protection and measure Bus monitor and paratactic voltage switch 2、Monitoring device based on the DSP (digital signal processor) and VLSI technique, with advanced core structure, high-speed signal processing and real-time processing capabilities. The especially components-level, project-level, user-level programming model, providing 31*7 protections whose style and parameters can be set local or remote. Easily realizing that lock/ unlock and match with other equipments base on switch inputs and relay’s programmable outputs. Adopting high-speed, high-precision measure technique, sampling frequency reach 1600Hz. Millisecond-level FFT compute capability, let device get base-wave and 2-9 times harmonics. Metrical values are digitized calibration and effective supp