如何应用zernikesag表面对全反射系统建模..docVIP

How to Use the?Zernike?Sag Surface to Model an All-Reflective System 如何应用zernike sag表面全反射系统 This is a companion article to?How To Model a Black-Box Optical System Using?Zernike?Coefficients, and discusses the special case of an all-reflective design. This uses a?Zernike?Sag surface, instead of a?Zernike?Phase surface. The benefit is that the resulting system models the original all-reflective system at all wavelengths for a given field point. 这篇文章是“用zernike系数定义黑盒光学系统”姊妹篇，并且讨论了全反射系统的特殊情况。这里采用zernike phase surface 了zernike sag surface，带来的好处是，对于给定的结果系统对于原始的全反射系统在所有波长都是成立的。Authored By: Mark Nicholson 作者：马克 翻译：Snow Fox Published On: August 14, 2007 版 How to Use the?Zernike?Sag Surface to Model an All-Reflective System如何应用zernike sag表面对全反射系统建模 This is a companion article to?How To Model a Black-Box Optical System Using?Zernike?Coefficients.?Please read that article and understand its contents before proceding with this article.?这篇文章是“用zernike系数定义黑盒光学系统”姊妹篇请之前仔细这篇文章并且这篇文章的内容。 As discussed in that article,?Zernike?data represents a measurement of the performance of an optical system at a specific field and at a specific wavelength. 姊妹篇中讨论的，zernike数据代表了特殊视场与特殊波长下，光学系统性能的测量。Because information about the glasses, radii of curvature, aspheric coefficients etc are not part of the?Zernike?data, there is no way to scale?Zernike?data to a different field or wavelength. 系统的玻璃、曲率半径，非球面等都不是zernike数据的一部分，这样就不能把zernike数据从一个波长视场量到其它波长或者视场。For this reason, in general you will need a set of?Zernike?data for each (field, wavelength) pair you want to model performance at. ，通常你需要定义一系列数据来对你的系统性能建模。These can be entered into Zemax by either having a separate file for each (field, wavelength) combination or (more likely) a separate configuration for each (field, wavelength) pair.? 可以通过为每一个(、视场)文件组合，或者的是）独立的每一个（、视场）配置。However, if you are working with an all-reflective design, then you can use the?Zernike?Standard Sag surface to describe the aberrations of the optical system. ，如果你一个全反射系统的