SFF-8431简介及SFI电气参数测试说课.ppt

C.1 Acquainted with Our Instrument DSA8200 Digital Serial Analyzer Eye Diagram Test by DSA8200 Eye Diagram Test by DSA8200 CR125A Electrical Clock Recovery instrument Eye Diagram Test by DSA8200 80E04 Electrical Sampling Module with TDR function. Eye Diagram Test by DSA8200 C.2 Eye Diagram Test Environment Setup of SFI Notes：Please see the attached notes to set the eye diagram test setup. Step 1. Installing the hardware environment as “figure 1” showing; Eye Diagram Test by DSA8200 Step 2. POWER ON the instruments and wait 20 minutes for instruments warm-up period ; Eye Diagram Test by DSA8200 Step 3. Confirm the TDR function is DISABLED during the eye diagram test to avoid damage the 80E04 TDR module; Notes: Confirm those check-box under “TDR” SETUPS is unchecked to disable the TDR functions on the test channel. Eye Diagram Test by DSA8200 Step 4. Execute compensation and wait until the status of all items warm up to PASS ; If the status is Fail, rerun the compensation. If Fail status continues and you have allowed warm up to occur, the module or main instrument may need service. Step 5. Setting software environment; Setting the Display Style Notes: Select the Infinite Persistence on the “Disp” and the “fast sampling” mode on the front panel. Eye Diagram Test by DSA8200 Setting trigger Notes: Select the External Prescaler as the trigger source. Eye Diagram Test by DSA8200 Setting Math as sources Eye Diagram Test by DSA8200 Notes：For differential signal eye test, subtract the two differential sources we using to define a math as the aimed signal source. Waveform Databases Eye Diagram Test by DSA8200 Notes：Select the math we had defined as the waveform database and choose the infinite mode to display it. Mask Setting Eye Diagram Test by DSA8200 Notes：Select our aimed eye mask in the drop-down menu or import customer mask we had defined. Setting Measurements Eye Diagram Test by DSA8200 Notes：Select the signal source and set signal type to “NRZ”. Then, set me