水泥電力石化集团企业工程设计与施工.docVIP

Development of an electrical power take off system for a sea-test scaled offshore wave energy device??Original Research ArticleRenewable Energy This paper details the design, deployment and operation of a power take off system for a 1:4 scale offshore Oscillating Water Column (OWC) Wave Energy Converter (WEC). Ocean energy device prototypes at this scale present a unique set of challenges in that the integration of prime movers and generators typically begins to take place at this particular development stage, which may also represent first deployment at sea.The presence of electrical equipment and rotating machinery in the offshore environment brings its own engineering and operational difficulties. Moreover, such devices are typically not grid connected, necessitating the development of custom power conversion and control equipment. The paper describes the design considerations, details of design, deployment experiences, operational experiences of such a system and concludes with recommendations for future projects in the area. Article Outline 1. Introduction 2. Power take off requirements 3. Pre-existing power take off elements 4. Design philosophy 4.1. Robustness 4.2. Maintainability 4.3. Usability 4.4. Environmental suitability 4.5. Safety 5. Power electronics design 5.1. Motoring mode design 5.2. Generating mode design 5.3. Implementation of power electronics 6. Instrumentation 7. Control 8. Testing, deployment and operation 9. Results 10. Recommendations and conclusions Acknowledgements References Monitoring the effect of restoration measures in Indonesian peatlands by radar satellite imagery??Original Research ArticleJournal of Environmental Management Materials processing for lithium-ion batteries??Review ArticleJournal of Power Sources Research highlights This paper briefly reviews materials-processing for lithium-ion batteries. Materials-processing is a major thrust area in lithium-ion battery. Advanced materials-processing can improve battery perfo