润滑油研讨会解析.pptVIP

选用事项： 普通荷载－纯矿物油 普通荷载，高速－透平油级的矿物基油 中等重负荷－加有抗磨添加剂的矿物油 重负荷或冲击负荷－极压油（尤其是表面硬化过的齿轮） 齿轮油的应用 齿轮油应具备的功能 抗磨 提供冷却 防腐蚀 带走碎片和污染 降噪 防止金属间接触 移除热量 抗点蚀 Click to edit Master subtitle style * The lubricant base stock from the refining process is used for mineral oils – the base stock then undergoes further refining processes to improve the viscosity and oxidation stability of the product as well as the HSSE. We use solvent refined paraffinic mineral oils as our base stocks. The process makes use of solvents which preferentially dissolve one of the groups in the oil ( usually the aromatics). The oil is mixed thoroughly with the solvent and then allowed to settle. Two layers or phases are formed – the lower layer consists of the dissolved components and the upper layer, of the undissolved components. Both layers are chemically unchanged as the process only involves a physical separation. After separation, the solvent is then recovered by distillation. The desire to remove the aromatic material is be原因 aromatic type components oxidise readily and produce sludges, they have a poor viscosity index an have health risks associated with them. * 14 eg: TOO MUCH EMPHASIS ON ONE ANNUAL PERFORMANCE RATING REVIEW TEAM Bernie Bulkin, Ian Wrenn, TDU Chris London, TDU Malcolm Denham FTU/EVT Beth Pilling, HR Kerry Harrison, LTU IMPLEMENTATION TEAM Ian Wrenn, TDU Kerry Harrison, LTU Nick Kernoghan, AAS Beth Pilling, HR Neil Jones, OHR * 12 eg: TOO MUCH EMPHASIS ON ONE ANNUAL PERFORMANCE RATING REVIEW TEAM Bernie Bulkin, Ian Wrenn, TDU Chris London, TDU Malcolm Denham FTU/EVT Beth Pilling, HR Kerry Harrison, LTU IMPLEMENTATION TEAM Ian Wrenn, TDU Kerry Harrison, LTU Nick Kernoghan, AAS Beth Pilling, HR Neil Jones, OHR * 19 eg: TOO MUCH EMPHASIS ON ONE ANNUAL PERFORMANCE RATING REVIEW TEAM Bernie Bulkin, Ian Wrenn, TDU Chris London, TDU Malcolm Denham FTU/EVT Beth Pilling, HR Kerry Harrison, LTU IMPLEMENTATION TEAM Ian Wrenn, TDU Kerry Harrison, LTU Nick Kernoghan, AAS Beth Pilling,