型h钢残余应力的研究现状论文--本科毕业设计论文.docVIP

XXXXXXXX大学 本科生课程论文 题 目：H型钢残余应力的研究现状 学生姓名： 学 号： 专 业： 班 级： 指导教师： H型钢残余应力的研究现状 摘 要 H型钢是一种截面面积分配更加优化、强重比更加合理的经济断面高效型材，因其断面与英文字母“H”相同而得名。由于H型钢的各个部位均以直角排布，因此H型钢在各个方向上都具有抗弯能力强、施工简单、节约成本和结构重量轻等优点，已被广泛应用。H型钢分为热轧H型钢 和焊接H型钢（H）两种，热轧H型钢又分为宽翼缘H型钢（HW中翼缘H型钢(HM)和窄翼缘H型钢（HN）三种。 关键词：；； The current research status of h-beam residual stress Abstract H section steel is a kind of cross section area allocation optimization and weight more reasonable than economic section effective profiles, because of its cross section the same as the English letter H the name. Since the different parts of h-beam with orthogonal configuration, so h-beam in all directions has bending capacity, simple construction, cost saving and structure light weight etc, and has been widely used. H-beam is divided into hot rolled H section steel and welding h-beam (H), hot-rolled h-beam is divided into wide flange h-beam (HW) of the h-beam flange (HM) and narrow the h-beam flange (HN) three. It is well known that the presence of residual stress in steel on the use of steel performance especially has a great impact on the fatigue performance. , the formation of the residual stress in steel there are three main ways: in the cross section of the steel after hot rolling or welding the uneven cooling, steel group phase change, steel cold straightening etc. This topic to h-beam as the research object, respectively from the cooling after hot rolling residual stress and residual stress after straightening, welding residual stress after three aspects study the current research status of h-beam residual stress. Key words: H-Beam; residual stress; hot rolling; straightening; weld 目 录 摘 要 I 1.引 言 1 1.1研究背景 1 1.2研究的目的和意义 1 2 H型钢热轧后冷却残余应力 1 2.1 H型钢热轧过程中残余应力有限元模拟 1 2.2温差对H型钢残余应力的影响 2 2.3 H型钢热轧后冷却残余应力小结 4 3 H型钢矫直后残余应力 4 3.1 H型钢矫直残余应力分析 4 3.2矫直对H型钢残余应力的影响 5 3.3 H型钢矫直后残余应力小结 6 4 H型钢焊接后残余应力 6 4.1 H型钢焊接残余应力分析 6 5 结 论 8 参考文献 9 1.引言 1.1研究背景 H型钢是一种经济型断面钢材，广泛用于工业、建筑、桥梁、石油