螺栓預紧力的模拟对比.docVIP

/prep7 /title, Sample application of PSMESH et,1,92 mp,ex,1,1e7 mp,alpx,1,1.3e-5 mp,prxy,1,0.30 mp,ex,2,3e7 mp,alpx,2,8.4e-6 mp,prxy,2,0.30 tref,70 /foc,,-.09,.34,.42 /dist,,.99 /ang,,-55.8 /view,,.39,-.87,.31 /pnum,volu,1 /num,1 cylind,0.5,, -0.25,0, 0,180 cylind,0.5,, 1,1.25, 0,180 cylind,0.25,, 0,1, 0,180 wpoff,.05 cylind,0.35,1, 0,0.75, 0,180 wpoff,-.1 cylind,0.35,1, 0.75,1, 0,180 wpstyle,,,,,,,,0 vglue,all numc,all vplot mat,1 smrt,off vmesh,4,5 mat,2 vmesh,1,3 /pnum,mat,1 eplot psmesh,,example,,volu,1,0,z,0.5,,,,elems CM,lines,LINE /dist,,1.1  cmplot /solu /filename,contact,db /prep7 et,1,92 mp,ex,1,1e7 mp,prxy,1,0.3 mp,ex,2,3e7 mp,prxy,2,0.3 cylind,0.7,,-0.25,0,0,180 cylind,0.7,,1,1.25,0,180 cylind,0.25,,1,0,180 vglue,all wpoff,0.05 cylind,0.35,1,0,0.75,0,180 wpoff,-0.1 cylind,0.35,1,0.75,1,0,180 wpstyle,,,,,,,,0 numc,all vplot esize,0.1,0 mat,1 smrt,off vmesh,1,2 mat,2 vmesh,3,5 eplot asel,,,,4 nsla cm,c1_to_c2,node asel,,,,2 nsla cm,c1_to_b,node asel,,,,11 nsla cm,c2_to_c1,node asel,,,,12 nsla, cm,c2_to_b,node asel,,,,20 nsla cm,b_to_c1,node asel,,,,23 nsla cm,b_to_c2,node asel,,,,15 eqslve,pcg,1e-8 asel,s,loc,y da,all,symm asel,all dk,1,ux dk,12,ux dk,1,uz sload,1,9,,force,100,1,2 /title,Sample application of PSMESH - preload only solve !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !Finally, we construct the actual solution of interest. We want to !know what happens to the preload in the bolt, and the stress field around !it, when the assembly temperature rises to 150° F. !Both the preload and the stresses increase because, for a uniform !temperature rise, there is greater thermal expansion in the aluminum plates !than in the steel bolt. Any method for applying preload that did not !allow the load to change would be unable to predict this result. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! /post1 plnsol,s,z /solu antype,,restart tunif,150 /title,Sample appl