毕业设计（论文）-电铅阴极制造倾斜输送机设计（全套图纸三维）.doc

XX学院 毕业设计（论文） 题 目 院 （系） 专业班级 学生姓名 学号 指导教师 职称 评阅教师 职称 摘 要 关键词：电铅阴极制造倾斜输送机 驱动机构 结构 参考价值 全套图纸，加153893706 ABSTRACT This graduation design is the optimization design of driving roller conveyor, first on the driving roller type conveyer is summarized; then analyzed the selection principle and calculating method of driving roller conveyor; then calculated based on these design criteria and abase is designed; then checked on the main parts selected conveyor. Is the drive roller conveyor consists of four main parts: driving device, tension device, middle rack, and the moving part. Finally, a simple description of the installation and maintenance of transport. At present, the drive roller conveyor is moving towards long distance, high speed, low friction direction, air cushion conveyor in recent years is one of the. In the design, driving roller type conveyer manufacture and application, at present our country compared with foreign advanced level there are still large gaps, domestic in the design and manufacture of driving . This design is the optimization design of driving roller conveyor, by comparing the control, structure driven roller conveyor for the traditional are improved and optimized, the applicable range of driving roller conveyor of the type of a broader, more flexible, and has certain reference value to the selection and design of the work. Keywords：Driving roller type conveyer optimal ;Crankshaft;Processing craft;Type selection design 目 录 摘要 I ABSTRACT II 一 课题研究的内容 1 （一）倾斜式输送机的发展概况 5 （二）倾斜式输送机的应用 5 （三）倾斜式输送机的发展方向 5 （四） Solidworks设计基础 4 1.草图绘制 5 2.基准特征，参考几何体的创建 6 3.拉伸、旋转、扫描和放样特征建 7 4.工程图的设计 10 5.装配设计