《ADICN0301通用LVDT信号调理解决方案.docxVIP

ADI公司的AD698是完整的单片线性可变差动变压器(LVDT)信号调理子系统, 结合LVDT使用，能够以较高精度和可重复性将传感器机械位置转换为单极性或双极性直流电压.工作频率20Hz到20kHz,单极或双极输出,线性度0.05%,输出电压611V,可以用于线性位移测量.本文介绍了AD698产品亮点和主要特性,几种典型应用电路以及CN0301通用LVDT信号调理电路,材料清单和PCB元件布局图.Samsung Electro-MechanicsSeoul SemiconductorTI (Texas Instruments)Walsin TechnologyThe AD698 is a complete, monolithic Linear Variable Differential Transformer (LVDT) signal conditioning subsystem. It is used in conjunction with LVDTs to convert transducer mechanical position to a unipolar or bipolar dc voltage with a high degree of accuracy and repeatability. All circuit functions are included on the chip. With the addition of a few external passive components to set frequency and gain, the AD698 converts the raw LVDT output to a scaled dc signal. The device will operate with half-bridge LVDTs, LVDTs connected in the series opposed configuration (4-wire), and RVDTs.The AD698 contains a low distortion sine wave oscillator to drive the LVDT primary. Two synchronous demodulation channels of the AD698 are used to detect primary and second-ary amplitude. The part divides the output of the secondary by the amplitude of the primary and multiplies by a scale factor.This eliminates scale factor errors due to drift in the amplitude of the primary drive, improving temperature performance and stability.傲壹电子—电子元器件分销商官网：中文网：The AD698 uses a uniqueratiometric architecture to eliminate several of the disadvantages associated with traditional approaches to LVDT interfacing. The benefits of this new circuit are: no adjustments are necessary; temperature stability is improved; and transducer interchangeability is improved.AD698产品亮点:1. The AD698 offers a single chip solution to LVDT signal conditioning problems. All active circuits are on the mono- lithic chip with only passive components required to com-plete the conversion from mechanical position to dc voltage.2. The AD698 can be used with many different types of posi-tion sensors. The circuit is optimized for use with any LVDT, includ