《函数信号.docVIP

目 录 1函数发生器总方案及原理框图 1 1.1 原理框图 1 1.2 函数发生器的总方案 1 2课程设计的目的和设计的任务 2 2.1 设计目的 2 2.2设计任务 2 2.3课程设计的要求及技术指标 2 3电路各组成部分的工作原理 3 3.1 方波发生电路的工作原理 3 3.2 方波---三角波转换电路的工作原理 3 3.3 三角波---正弦波转换电路的工作原理 6 3.5 总电路图 9 4电路仿真 10 4.1 方波---三角波发生电路的仿真 10 4.2 三角波---正弦波转换电路的仿真 11 5 电路的安装与调试 11 5.1 方波---三角波发生电路的安装与调试 11 5.2 三角波---正弦波转换电路的安装与调试 11 5.3 总电路的安装与调试 12 5.4调试中遇到的问题及解决的方法 12 6电路的实验结果 14 6.1 方波---三角波发生电路的实验结果 14 6.2 三角波---正弦波转换电路的实验结果 14 6.3 实测电路波形、误差分析及改进方法 15 7实验总结 16 8器仪表清单 17 参考文献 18 致谢 19 关键词：函数发生器；正弦波；三角波；方波  Abstract Function generator generally means can automatically generate sine wave, square, triangle over sawtooth wave, of the voltage waveform ladder wave etc circuit or device. Based on the use of three different, have produced the function generator or several waveform, the device used can be divided equipments (such as low frequency signal function generator S101 all adopt the transistor), also can use integrated circuits (such as monolithic function generator module 8038). For further grasp the basic theory and experiment circuit this subject adopts debug technology, by integrated operational amplifier and transistor differential amplifiers composed of square wave - triangle wave - sine wave function generator design method. Produce sine wave and square-wave, triangle wave solutions has a variety of, like first produced by plastic circuit, then sine wave will ChengFangBo, again by sine wave transform integral circuit will become triangle square wave; Can also first produce triangle wave - square-wave, again will triangle wave into sine wave or will square-wave into sine wave, etc. This subject adopts first produce square-wave - triangle wave, then triangle wavelet transform into sine wave circuit design method. Key words: function generator; Sine wave; Delta waves; square-wave  1函数发生器总方案及原理框图 原理框图 图1 原理框图 函数发生器的总方案 函数发生器一般是指能自动产生正弦波、三角波、方波及锯齿波、阶梯波等电压波形的电路或仪器。根据用途不同，有产生三种或多种波形的函数发生器，使用的器件可以是分立器件(如低频信号函数发生器S101全部采