ppt课件-spontaneousignition.pptVIP

Bale density should be at least 10 pounds per cubic foot to facilitate resistance to weathering. As bale density increases, the rate at which moisture and heat escape decreases. Therefore, it is critical that dense bales be baled at the proper moisture (18 to 20 percent or less) so that risk of spoilage and heating problems are reduced. * Damage from mite feeding can cause leaf bronzing, stippling, or scorching. In timothy economic loss is caused by a drop in color quality due to reduction in photosynthesis and the stippling damage that results from mite feeding. * Qualitative analysis—gives