ppt课件-thermalmanagementconsiderationsforpcbs-tak)2000.pptVIP

Sample results Total PCB thickness is 1.59mm PCB comprises only copper and FR4 layers k of copper is 390 W/mK k of FR4 is 0.25 W/mK Sample results Conclusions from results Even for thin copper layers, kIn-plane is much greater than kThrough As FR4 has very low thermal conductivity, a continuous copper layer will dominate heat flow Because of this, thermal conduction is not efficient where no continuous copper path exists Refining calculations Trace (signal-carrying) copper layers have much less effect on heat transfer than planes Trace layers can normally be excluded from calculations If requi