毕业论文—单面多轴钻孔组合机床液压系统设计.doc

毕业设计报告 (2015届) 题 目： 单面多轴钻孔组合机床液压系统设计 所 属 院 系： 机电与汽车工程学院 摘 要 液压传动是用液体作为介质来传递能量的，液压传动有以下优点：易于获得较大的力或力矩，功率重量比大，易于实现往复运动，易于实现较大范围的无级变速，传递运动平稳，可实现快速而且无冲击，与机械传动相比易于布局和操纵，易于防止过载事故，自动润滑、元件寿命较长，易于实现标准化、系列化。 本设计主要是为设计组合机床动力滑台液压传动系统。液压系统应用在机床中，可以实现机床自动进给，而且可以使机床的运动更平衡，加工精度更高，效率更高，从而实现机床的自动化。??钻孔组合机床是以系列化，标准化的通用部件为基础，配以少量的专用部件组成的专用机床，适于对产品大批大量，一面或多面同时成组多加工的高效机加工设备，其中液压动力滑台是其重要组成部件。通过本课题设计训练，使我们全面熟悉加工工艺，组合机床液压动力滑台的组成和工作原理。在此基础上，完成给定参数的动力滑台液压系统设计。 关键词 液压系统 组合机床 差动快进 Abstract Hydraulic transmission is liquid as the medium to transmit energy, hydraulic transmission has the following advantages: easy to obtain large force or torque, power to weight ratio, easy to realize the reciprocating motion, easy to realize a wide range of stepless variable speed, stable motion transfer, realize fast and no impact, compared with the mechanical transmission, easy structure and operation, easy to prevent the overload accident, automatic lubrication, components and long service life, easy to realize the standardization and seriation. This design is mainly for power hydraulic transmission platform system design of modular machine tool. The application of hydraulic system in machine tool can realize machine tool automatic feed, and can make machine tool movement more balanced, machining accuracy higher, more efficiency, so as to realize machine tool automation. Combination drilling machine series, standardization of the general components as the foundation, special-purpose machine tool with a small number of special components composition, suitable for product mass, one or more at the same time group processing, machine processing equipment, which hydraulic power sliding table is an important group into parts. Through this topic design training, enable us to fully familiar with the process, combination machine tools, hydraulic power sliding table composition and working principle. On this basis, the design of hydraulic system of power slipway to complete a giv