LM5119設计的双路DC.docVIP

LM5119设计的双路DC-DC 20A电源控制方案本文介绍了LM5119主要特性，方框图，典型应用电路图和LM5119EVAL评估板主要特性，电路图和材料清单（BOM）。 NS 公司的LM5119是双路同步电流模式降压控制器，工作电压从5.5V到65V，开关频率从50kHz 到 750kHz，具有强固的3.3A峰值栅极驱动器，可编程输出从0.8V起到输入电压的90%，输出电流高达20A，主要用在需要精密电压稳压器如通信，汽车电子以及工业控制应用。 LM5119主要特性：■ Emulated peak current mode control■ Wide operating range from 5.5V to 65V■ Easily configurable for dual outputs or interleaved single output■ Robust 3.3A peak gate drive■ Switching frequency programmable to 750kHz■ Optional diode emulation mode■ Programmable output from 0.8V■ Precision 1.5% voltage reference■ Programmable current limit■ Hiccup mode overload protection■ Programmable soft-start■ Programmable line under-voltage lockout■ Automatic switch-over to external bias supply■ Channel2 enable logic input■ Thermal Shutdown■ Leadless LLP32 (5mm x 5mm) package图1。LM5119方框图图2。LM5119典型应用电路图图3。LM5119 10V 4A和5V 8A典型应用电路图LM5119EVAL评估板The LM5119EVAL evaluation board provides the design engineer with a fully functional dual output buck converter, employing the LM5119 Dual Emulated Current Mode Synchronous Buck Controller. The evaluation board is designed to provide both 10V and 5V outputs over an input range of 14V to 55V. Also the evaluation board can be easily configured for a single 10V, 8A regulator.LM5119EVAL评估板主要特性：Performance of the Evaluation Board? Input Voltage Range: 14V to 55V? Output Voltage: 10V (CH1), 5V (CH2)? Output Current: 4A (CH1), 8A (CH2)? Nominal Switching Frequency: 230 KHz? Synchronous Buck Operation: Yes? Diode Emulation Mode: Yes? Hiccup Mode Overload Protection: Yes? External VCC Sourcing: YesPowering and Loading ConsiderationWhen applying power to the LM5119 evaluation board, certain precautions need to be followed. A misconnection can damage the assembly.PROPER BOARD CONNECTIONThe input connections are made to the J1 (VIN) and J2 (RTN/ GND) connectors. The CH1 load is connected to the J3 (OUT1+) and J4 (OUT1-/GND) and the CH2 load is connec