(完整的一套产品检测标准英文Word文档.doc

MTL/ SGS TEST LIST (1) (Seating) (Combines Adult and Children’s sizes,:Chairs, Barstools, Ottomans,) Quality test standard/method Criteria（标准） Results 1.labeling / Design/Features（标签/设计特点） The actuality must keep consistency（一致性） with the claim（要求）. 2.Instructions指示 说明 Shall be included if necessary. Shall include assembly, mounting（装备）, use, maintenance（维护）, cleaning and safety information as required in the language(s) applicable to the destination（目的地） country(s) with no errors or spelling mistakes.（地名写错） Shall be easy to follow and accurate. 3.product size/weight产品尺寸 重量 Report actual. Shall comply with any claims (-0%, +3%) 4. Costco Plastic Bag Warning Statement If plastic bags (of any thickness) with a perimeter(周长) of 14 inches or greater are used in inner packaging, the following warning statement must be printed on at least one side of each bag in English, French and Spanish: 5. Lead In Surface Coating（被复盖） Shall not exceed 600 ppm (0.06% by weight) total lead 6. Workmanship（工艺）/ Level No major defects（缺点）。 No components（成分） missing, malformed（畸形的） or fractured （破裂） No hardware missing Smoothly ground welds（接合）, not over-ground and free of pits（凹陷） and splatter（说话结巴） No burrs（喉音） No loose components and unsecured fastening where rigidity（硬度） is required In the case of wood (e.g. laminates（薄板) proper and uniform（一致的） adhesion（支撑） No scratches, dents（凹痕）, cracks（裂缝）, marred（损坏） or discolored surface In the case of molded plastic, consistent and concise form and no defects evidencing（明显的） of overuse（过度的） of mold。 Finished edges and seams（衔接口） Accurate and consistent（调和的） painting Components even in color, uniform clarity All seams and components in even alignment（结盟） Accurate and consistent painting Components even in color, uniform clarity（清楚） 7. Sharp Points and Edges Shall have no sharp edges or sharp points on any component other than those required for functional use. 8. Cross Cut Adhesion Plating / finish must stay affixed – using a utili