DS1302时钟芯片C源程序.docVIP

// DS1302时钟芯片 C 源程序 // 程序设计:施爱飞 // 2001年3月13日 #pragma small #include reg52.h //下面是引脚连接关系 sbit ds1302_dat=P3^6; sbit ds1302_clk=P2^6; sbit ds1302_rst=P2^4; sbit ACC_0 = ACC^0; sbit ACC_1 = ACC^1; sbit ACC_2 = ACC^2; sbit ACC_3 = ACC^3; sbit ACC_4 = ACC^4; sbit ACC_5 = ACC^5; sbit ACC_6 = ACC^6; sbit ACC_7 = ACC^7; unsigned char ReadRam_Byte(unsigned char address); // 从Ram中读出一个字节 unsigned char ReadRTC_Byte(unsigned char address); // 从RTC中读出一个字节 unsigned char WriteRam_Byte(unsigned char address,unsigned char number); // 向 Ram中写入一个字节 unsigned char WriteRTC_Byte(unsigned char address,unsigned char number); // 向 RTC中写入一个字节 void ReadRam(unsigned char data * buffer,unsigned char size); // 从Ram中读出多 个字节 void ReadRTC(unsigned char data * buffer,unsigned char size); // 从RTC中读出多 个字节 void WriteRam(unsigned char data * buffer,unsigned char size); // 向Ram中写入多 个字节 void WriteRTC(unsigned char data * buffer,unsigned char size); // 向RTC中写入多 个字节 unsigned char ReadSec(void); // 从RTC中读出秒字节 unsigned char ReadMin(void); // 从RTC中读出分字节 unsigned char ReadHr(void); // 从RTC中读出时字节 unsigned char ReadDate(void); // 从RTC中读出日字节 unsigned char ReadMonth(void); // 从RTC中读出月字节 unsigned char ReadDay(void); // 从RTC中读出星期字节 unsigned char ReadYear(void); // 从RTC中读出年字节 void WriteSec(unsigned char number); // 向RTC中写入秒字节 void WriteMin(unsigned char number); // 向RTC中写入分字节 void WriteHr(unsigned char number); // 向RTC中写入时字节 void WriteDate(unsigned char number); // 向RTC中写入日字节 void WriteMonth(unsigned char number); // 向RTC中写入月字节 void WriteDay(unsigned char number); // 向RTC中写入星期字节 void WriteYear(unsigned char number); // 向RTC中写入年字节 void WriteControl(unsigned char number);// 向慢速充电控制寄存器写入控制字节 void EnableWP(void); // 禁止写保护 void DisableWP(void); // 允许写保护 unsigned char ReadRam_Byte(unsigned char address) // 从Ram中读出一个字节 { ds1302_clk = 0; ds1302_rst = 0; ds1302_rst = 1; ACC = address; ACC = 1; ACC |= 0xc1; ds13