大学毕设论文__五叶轮零件的电火花线切割加工.docVIP

五叶轮零件电火花线切割加工 摘要 近年来，我国电火花线切割技术得到了很好的发展，特别是快走丝机床在我国应用广泛,社会上对这门技术人才的需求量也越来越多。本文介绍了快走丝线切割软件的实际应用和零件在线切割加工中的流程及加工中的一些基本知识和注意事项。 关键词：电火花；线切割软件；加工流程 The five impeller components electrical fire colored thread cutting processing Abstract Author:Meng Qi Lue Tutor:YanRuiQiang In recent years, our country electrical fire cut the technology to obtain the very good development, specially quickly walked the silk engine bed to applywidely in our country, in the society more and more were also many to this technical talented persons demand quantity. This article introduced quickly walks the silk thread to cut software the practical application and the components on-line cuts in the processing in the flow and processing some elementary knowledge and the matters needing attention. Keywords: Electric spark; Line cutting software; Process technological process 目 录 1 绪论…………………………………………………………………………………1 2 零件图的工艺分析…………………………………………………………………1 3 毛坯的确定…………………………………………………………………………2 3.1 材料的选择…………………………………………………………………...2 3.2 毛坯的尺寸…………………………………………………………………...2 4 毛坯的加工…………………………………………………………………………2 4.1 电极丝起始位置的基准面加工……………………………………………...2 4.2 线切割定位基准面的加工…………………………………………………...3 5 设备的选择…………………………………………………………………………3 6 电极丝的选择与安装………………………………………………………………3 6.1 电极丝的选择………………………………………………………………...3 6.2 电极丝的安装………………………………………………………………...4 7 工件的安装…………………………………………………………………………4 8 电极丝垂直度的找正………………………………………………………………5 9 加工前的其他准备…………………………………………………………………5 9.1 工作液的选择与配置………………………………………………………...5 9.2 电参数的确定………………………………………………………………...6 9.3 程序的工艺分析……………………………………………………………...6 10 线切割的加工……………………………………………………………………10 10.1自动加工及其监控…………………………………………………………10 10.2加工中特殊情况处理………………………………………………………10 零件的质量分析……………………………………………………………………..10 总结…………………………………………………………………………………..12 致谢…………………………………………………………………………………..13 参考文献……………………………………………………………………………..14 1绪论 随着制造领域的快速发展，近来我国电火花线切割机床的生产和技术得到了飞速发展，