DVDSPCe.docVIP

DVD PERFORMANCE MEASUREMENT PRODUCT SPECIFICATION FORMAT: NTSC DVD PERFORMANCE / MEASUREMENT SPECIFICATION Version 1.20 Revision History Revision Number Date: Description Authorization 0 21 July 1998 Original Issue 1 16 Dec 1998 Set “4.3 LUMINANCE S/N RATIO” for composite DVD composite video and S-Video to 65db. This is an effort to catch noise problems 2 8th Apr, 1999 1.11 Changed THD distortion limit 5.1.3.1 from .01% to .02% 3 25th June 2001 1.20 Massive overhaul. Added component, deleted VCD. 4 19th July, 2001 Revised Cover, Title and Filename to store on VOE “G” Drive Sung Jo Kim 5 19th July, 2001 DVD with LCD Display Display temperature and defective segment specifications Sung Jo Kim 6 7/20/01 1.30 JCE Removed limits from spec. Put in nominal values. Limits are in another file. J. Engle for Sung Jo Kim 7 23rd July 2001 Added Title Wrap of Document, text formatting and multimedia logo to page header. D. Bacon for Sung Jo Kim 8 12 Sept 2001 RFI Test Procedure D. Bacon for Sung Jo Kim DVD PERFORMANCE / MEASUREMENT SPECIFICATION Version 1.20 GENERAL SCOPE This specification applies to all DVD players capable of playing North American standard television signals. The specifications shall be fully adequate to permit the obtaining without any modification of the DVD player any such approvals or ratings which THOMSON may wish or may be required to obtain including, without limitation, approval from the United States Federal Communications Commission and from Underwriters Laboratories, Inc., Canadian Standards Association, compliance with standards adopted by the United States Consumer Produce Safety Commission, obtaining any other approvals or ratings and compliance with any other standards, rules and regulations required now or in the future by any federal, state and local laws or regulations of the U.S.A., and Canada. It must conform in all particulars to the characteristics of the final sample or samples approved by Product Engineering and the Prod