(ABAQUS如何画XY曲线图2.docVIP

From the main menu bar, select OptionsXY OptionsChart Legend (or double-click the legend) to position the legend. In the Chart Legend Options dialog box, switch to the Area tabbed page. In the Position region of this page, toggle on Inset and click Dismiss. Drag the legend in the viewport to reposition it. The customized X–Y plot appears, as shown in Figure D–12. 这里说的主要就是用来加曲线图中左上角的那个小方框了,把ARAE属性页上的Insert旁的小方框勾上就OK了. Figure D–12 Customized X–Y plot of displacement. You will now display a second X–Y plot in a new viewport. To create a new viewport, select ViewportCreate from the main menu bar. The new viewport appears. The same X–Y plot that you had in the first viewport appears in the new viewport. When multiple viewports are visible, the dark gray title bar indicates the current viewport; all work takes place in the current viewport. For more information, see “What is a viewport?,” Section 4.1.1 of the Abaqus/CAE Users Manual. Tile the viewports vertically by selecting ViewportTile Vertically from the main menu bar. Create a similar X–Y plot of vertical velocity (V2) versus time. You cannot select velocity during the first step because the first step was not a dynamic step; Abaqus/Standard computed velocity and acceleration only during the second and third steps. Use the same X-axis range as before, and use a Y-axis range from 1000 to –1000. Label the Y-axis Velocity V2. The finished plot is shown in Figure D–13. 上边说的意思就是说告诉我们如何建立多个视窗显示多条曲线了.可按下图操作 Figure D–13 Customized X–Y plot of velocity. ? D.11?Operating on X–Y data An X–Y data object is a collection of ordered pairs that Abaqus stores in two columns—an X-column and a Y-column. The Operate on XY Data dialog box allows you to create new X–Y data objects by performing operations on previously saved X–Y data objects. In this tutorial you will create a stress versus strain data object by combining a stress versus time data object with a strain versus time data object. Then, you will plot the stress-str