最大化渣油转化率的Uniflex加氢裂化工艺技术[精选].ppt

Investment of UNIFLEX Project (800kt) UNIFLEX项目投资情况（80万吨规模） 建设投资估算表 序号 项目 规模 投资额（万元） 　 建设投资 　 147600 一 固定资产投资 　 131300 （一） 工程费用 　 124000 1 工艺装置 　 98000 1.1 80万吨/年重油加氢裂化装置 80万吨/年 63000 1.2 52万吨/年油品加氢改质装置 52万吨/年 16000 1.3 10万吨/年气体分离及轻烃回收装置 10万吨/年 7000 1.3 3万吨/年硫磺回收装置 3万吨/年 12000 2 配套系统 　 25000 （二） 固定资产其他费用 　 7000 二 无形资产费用 　 4600 三 其他资产费用 　 800 四 预备费 　 10900 Ⅱ 工程费中可抵扣的增值税 　 -11600 Page:* Wison Confidential Page:* Wison Confidential Page:* Wison Confidential Wison Engineering Ltd. Wison Confidential ARCHITECTURE STUDIO 和 上海中森建筑与工程设计顾问有限公司 合作项目 * * * * * Shown here is the basic flow scheme for the Uniflex process. It is very similar to a once through VGO Hydrocracker flow scheme. However there are some differences. The reactor is up flow and the main recycle gas to the reactor is heater separately to a higher temperature then the feed and a smaller quantity of the recycle gas. This is to ensure no cracking occurs in the feed heater and only in the reactor. A vacuum column is also required to separate the unconverted residue (Pitch) from the Vacuum Gas Oil products. REVEAL UOP has spent considerable efforts in reviewing the flow scheme used in the CANMET Hydrocracking Process and modifying it where it was deemed advantageous to further improve the reliability of the Process and equipment. The flow scheme now offered as part of the Uniflex Process meets UOP’s standards developed over a long period of time from both its thermal and high pressure hydroprocessing technology backgrounds. 最大化渣油转化率Uniflex加氢裂化工艺技术 惠生工程（中国）有限公司 CPEC 第七届中国地炼市场与发展峰会 中国上海 2014.03.28 惠生工程（中国）有限公司成立于1997年，2012年在香港联交所主板上市 　 Wison Engineering Ltd. was founded in 1997, Listed on HKEx main board in 2012 专业从事石油化工、煤化工、炼油等装置工程建设和技术服务 Specialize in plant building and technical services in the fields of petrochemical, coal-to-chemical and oil refining 可提供从项目前期规划到开车运营的一站式服务 Able to provide one-stop service from preliminary planning to start-up and operation 2012年在中国建设部石化